Kitchen Window Seat with Storage

This project has been on my mind literally since the day we first toured our home. (Can’t believe that’s been a year ago already!) We knew from the start that we would need to resolve the layout and storage issues in the kitchen. The previous owners’ solution was to construct a massive built-in pub table off the side of the countertop. It provided a ton of great storage space behind its hidden doors, but ate up entirely too much room in an already cramped space. After 9 months of contemplating its demise, we finally went for it.

Since I’m terrible at taking step by step pictures, I won’t attempt to make this in any way instructional. But it’s still fun to see the window seat’s progression from “looks like a toddler threw that together” to “kind of professional if you don’t look too close.” 😀  For instructional info, do what I did and Google “window seat DIY.” I watched tons of videos to see all the different elements that might be involved.

Before/After Pub Table

Here’s the “before” pictures (though not quite the best angles):

20140325-161532.jpg

Listing picture from before we painted

 

20140325-161216.jpg

Progress photo while in the middle of painting cabinets and adding pulls

It now occurs to me that I don’t have a SINGLE finished picture of the kitchen. Mental note… document final results!

Anyway, here’s what it looks like after disassembling the pub table. The window looks absolutely huge! The side of the cabinet will require some creative patch work.

20140325-110616.jpg

Building the Window Seat

First we removed the baseboard, then built sort of a mini “wall” frame and anchored it to the tile floor along the joists with 3″ decking screws. We pre-drilled the holes so as not to crack the tile. That’s a ledger board screwed to the wall under the window for the top of the box to be mounted to.

20140325-110648.jpg

After the frame was built and secured, we measured and cut the plywood for the front and the top edges around where the doors would go. The wall vent had to be extended to the front of the box using rectangular wall vent ducting and an elbow joint to lower it towards the floor a bit.

20140325-110726.jpg

Adam built a plywood casing around the duct so it wouldn’t get squished when we loaded stuff into the cabinet.

I really took my time cutting the wood for the doors since they needed to be functional and also look fairly clean. It took 2-3 hours to measure, cut, and hang them by myself. They are 48″ and 30″ long.

20140325-155104.jpg

As soon as the top was secured, Murphy laid claim to his new throne.

20140325-110836.jpg

Trimming the Window Seat

After days and days of construction, I was so excited to do the finishing touches! Semigloss white paint and base cap molding boxes make it look almost professional. I also used cove molding to trim out the top along the wall and a piece of stop moulding to dress up the front edge of the doors. The baseboard was salvaged from the wall behind the window seat.

20140325-155432.jpg

20140325-160126.jpg

Pretty on the Inside

Once the outside was pretty, it was tempting just to throw my kitchen supplies inside and close it until Thanksgiving. But if you know me, you know I’m way too OCD for that. I just HAD to trim out the inside of the cabinet too. Really, I was thinking about resale. As a homebuyer, I wouldn’t want to open a shiny white cabinet and see this:

Yucky bare floor and torn up walls where we removed the baseboard. Not very clean!

Yucky bare floor and torn up walls where we removed the baseboard. Not very clean!

So I painted the bare wood, covered the walls with beadboard wallpaper, and stuck down some vinyl floor tiles. (I mean, I’m not totally insane… I wanted it to be clean and nice, but not so much that I was willing to use real wood and tile to do so!)

IMG_7790IMG_7788

IMG_7820 IMG_7819 IMG_7818

 

Patching the Cabinet

I was even able to repair the side of the cabinet where the pub table came off. I spliced together some of the panels that made up the sides of the old pub table cabinet. They looked like Frankenstein at first….

20140325-111003.jpg

Nothing a little putty and paint can’t fix! (OK, a lot. A LOT of putty and paint.)

20140325-110933.jpg

A Pillow of Epic Proportions

Now I’m just working on finishing up the giant 7-foot pillow cushion. It’s hilariously huge. Someday I will make a high density foam seat cushion, but this will suffice for now!

20140325-111041.jpg

20140325-111100.jpg

Have you ever made a pillow bigger than yourself? It is a hilarious good time… I definitely recommend it. I might put it on my bucket list just to cross it off.

Happy window sitting,

20131010-172150.jpg

Advertisements

One thought on “Kitchen Window Seat with Storage

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s